Acopia Networks ARX 6000 Guía de instalación descargar pdf (Pagina 96)

Appendix B

Removing and Replacing FRUs

B - 4

5. Tighten the captive screws (top and bottom) on the new module.

WARNING

For modules with fiber-optic ports:

Fiber-optic ports must be protected by a rubber grommet filler or a cable

connector at all times to prevent dust from collecting in the transceiver.

Figure B.1 Ejector Tabs on Modules

Removing and Replacing a Disk Drive

WARNING

Static electricity can damage switch components. Be sure to wear antistatic

wrist straps before handling disk drives and modules.

To remove a disk drive:

1. Insert a key and turn the lock to the right to release the drive handle.

(The drive is locked when the notch is pointing up. When you turn

the notch to the right, the handle will release (see Figure B.2

).)

down and locked

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 102 103 104

Sin comentarios

Acopia Networks ARX 6000 Guía de instalación Pagina 96